To assemble a battery rack/enclosure, please see rack installation instructions. Connect battery modules together to the required system voltage, then connect battery string with charger or load; When multi-strings of batteries are to be parallel connected, connect batteries in series first and then complete the parallel connection.
Fix the wall mount rack by four explosion bolts onto the wall. Hung the battery onto the rack , as below picture. The minimum distance around the battery must be more than 300mm. Products can be used indoors and outdoors, indoor installation requires ventilation around, no obstacles.
Assemble the battery racks and fix them on the wall or con-nect the two racks. Assemble the battery modules and high-voltage control box-es, and fix them to the racks. Possible damage to the building due to static overload. The total weight of the battery storage system is 628kgs. Ensure that the installation site has suficient bearing capacity.
Standard battery rack as specified in Sec. 11.1.1 shall be acceptable as well since it facilitates removal and/or installation of batteries. “Stack Height The vertically stacked height of valve regulated batteries shall not exceed 1700 mm above the floor. VRLA battery mounting on a standard rack shall be allowed with its shall not exceed 1700mm.
The installation and operation manual applies to the modular battery energy storage system. Please carefully read this installation and operation manual to ensure the safe installation, preliminary debugging, and main-tenance of the High Voltage Series.
Insert the first battery module into the battery module rack at the bottom cluster rack; then in the order from bottom to the top, continue the instalment in the same way till it reaches the twelfth floor. On the thirteenth floor, insert the slide of the cabinet at the top of the rack into the high-voltage control box.