A 6V solar panel charger is a circuit designed to optimally charge a 12V lead-acid battery using a 6V solar panel. It provides approximately the same current as if the solar panel were directly connected to the battery.
Cut the wires and be sure that they are short enough to mount to your 6v solar panel. Using your soldering iron, solder the charge circuit to the solar panel. Using your glue gun, glue the charger to the end of the solar panel. Make sure that your USB port is not sticking out from the panel, or touching any leads.
You can charge a six-volt battery directly without a solar regulator, but you do so at significant risk. A solar regulator on the cheaper end is around $50. However, the regulator’s cost is minimal if you use the solar panel to charge the battery over many years.
First, it depends on your battery; 6V Lead-acid based batteries require a different charging voltage than lithium-based batteries. Secondly, the battery’s capacity; a 6V battery rated at 2-amp hour requires a different charging voltage than a 6V battery rated at 20-amp hours. Can I Charge a 6v Battery with a 5v Charger?
There is no danger in trying to charge a 12v battery with a 6v charger. There is not enough electricity involved to fill the 12v battery. The first lesson is that smaller voltage-rated chargers do not provide enough energy to charge larger voltage-rated batteries. So, for example, you cannot use a six-volt charger to charge a twelve-volt battery.
The solar panel will provide a little over 9 volts at its peak. Given that a six-volt battery is 100 percent charged at around seven volts, the pairing of the panel to a battery works when both are six volts. While that sounds good news, it is not always a good fit. Are we talking in circles? Nope, and here’s why.